One of the doors of your Peugeot 207 no longer locks properly, but it is rather problematic for the safety of your vehicle but also for your safety because in case the door opens when driving it can become dangerous. Especially when the locking is not done enough you run the risk of finding water infiltration and other. This is the reason why in this article we will explain to you why closing the door gets stuck. Then we will give you tips for fix your problem.

Peugeot 207

Why does the door of my Peugeot 207 no longer lock?

There are various possibilities when the door of your Peugeot 207 no longer locks. Over time, the components will be able to wear out et prevent proper locking of the car. This is the reason why we will help you spot What is your problem. You should know that when all the doors no longer lock on your Peugeot 207, this may reveal a centralization problem. If this is your case, do not hesitate to consult the following article for more information: Peugeot 207 no longer closes.

Door that no longer locks on Peugeot 207: Stuck lock:

Over time it is sometimes possible that the locking system seizes. Indeed to work well this one is lubricated during the manufacture of the car, however this oil can clog et take dust. In general, a car lock is not a wearing part, it should be operational throughout the life of the car. However, when you are in a dusty area, in this case it may happen that the mechanism becomes dirty.

In order to confirm the diagnosis, you have to control the state of the lock on the door of your Peugeot 207. If you see black residue, then you should clean the lock.

Door that no longer locks on Peugeot 207: Deregulated striker:

It would also be possible for the problem to come a misalignment between the door and your Peugeot 207. Indeed if the door is heavy, she can end up stoop and therefore no longer be aligned with the vehicle hook. When this is your case the door should bounce because the latch and the hook do not fit together properly. Sometimes only two millimeters of offset can block the closure.

To confirm the offset, stand in front of the lock et slowly close the door, you may notice that the hook does not fit into the lock. So, arranging the door in this case can be a bit complicated, however it is possible by cons adjust the hook and this solution is rather simple.

Door that no longer locks on Peugeot 207: Damaged closing strike:

Si the door bounces, it may also happen that the problem comes from the strike positioned on the door. The latter must fit into the hook and engage the lock when the door is closed. However if you have the custom of slamming the door it sometimes happens that the lock breaks.

In order to check if this is your case, use a screwdriver to mimic the hook. If when you are at the end of the lock the latch does not activate this indicates that it will be necessary to change the lock of your Peugeot 207.

Door that no longer locks on Peugeot 207: Linkage concern

Finally when you realize that the handle happens to be looser, in this case the problem may be comes from the door linkage. Effectively to connect the interior and exterior opening systems but also the centralization, metal rods will enable the devices to be activated. If a stems are loose or damaged then the mechanism will no longer be able to lock.

What should be done to repair a door that no longer locks on Peugeot 207?

Door that no longer locks on Peugeot 207: Unlock a lock:

You should provide yourself with a degreaser such as the WD40 found on the internet. Then the first thing to do is remove the door trim from your Peugeot 207 to access the mechanism. It is necessary to help yourself torx wrench and a flat screwdriver. Remove the handle et detach the trim slowly so as not to damage the clips. Unscrew the torx screws present on the edge of the door. When the trim is removed it will then be necessary Using a clean cloth, dust the interior with the degreaser. In this way you will be able to check if the elements are damaged or if a link rod is loose.

Door that no longer locks on Peugeot 207: Adjust the hook:

You will have to provide yourself a torx key, in this case it will not be necessary to remove the trim. Then save the original adjustment torx screws, and unscrew the fasteners. This will allow you to adapt the hook plate so that the door lock can fit properly with the door. You must adjust with great precision because a millimeter of offset is going to be very important. You can adjust it from top to bottom or from right to left. When it’s properly adjusted, tighten the screws a little and try again, when the problem is fixed, fully tighten the screws.

Door that no longer locks on Peugeot 207: Replace the cylinder:

You will first need to buy a new barrel in the right format, to do this we advise you to read the manufacturer's recommendations available on maintenance booklet of your Peugeot 207. You will have to start with remove the door trim, as explained above. When you access the inside of the lock, you should be able to remove the rod from the linkage by unclipping it. Then rotate the barrel seal to free him. Then remove the damaged barrel and replace it with the new one. Be careful when you will try closing we advise you to use a screwdriver to prevent the door from getting stuck.

Conclusion: a problem door that no longer locks on Peugeot 207, can be problematic because you could have your vehicle vandalized but also it could open while driving so for your safety do not wait before making the repairs.

To be able to have other tutorials on the Peugeot 207, we invite you to consult our other articles on the Peugeot 207.